Layin Samar da Croissant ta atomatik
Layin samar da Croissant na ZL1168 shine mafi kyawun zaɓi don samar da kayayyaki na masana'antu. Ganin ƙirar sa daidai, wannan kayan aikin yana samar da siffa iri ɗaya ta croissant da kuma matakin matsewa iri ɗaya na naɗi. A lokaci guda, ana iya haɗa shi da abubuwan cikawa kamar cakulan, jam da sauransu. Haɗin yanayin yankewa a tsaye da aikin diagon alwatika yana hana kullu mai siffar alwatika zamewa yayin aikin yankewa.
Ta hanyar sarrafa na'urar sarrafa bel ɗin jigilar kaya, kowace layi na kullu mai siffar murabba'i an raba ta da kyau, kuma na'urar sitiyari tana juya kullu mai siffar murabba'i digiri 90. Wannan aikin yana tabbatar da cewa duk kullu mai siffar murabba'i yana tsakiya kuma a cikin matsayi ɗaya ya shiga naɗaɗɗen naɗaɗɗen naɗaɗɗen. A halin yanzu, ana iya daidaita na'urar birgima bisa ga buƙatar sarrafa matsewar naɗaɗɗen naɗaɗɗen. Layin samar da croissant yana da tsari mai ƙanƙanta kuma tsawon na'urar gaba ɗaya mita 14 ne.
Siffofin samfurin
Tsarin ratayewa-Hasumiyar Gouge-mai yanke tsayi - na'urar raba-uku-uku-mai yanke-na'urar juyawa-na'urar fesa ruwa-na'urar ajiya-na'urar birgima-tsarin ciyar da tire.
1. Belin Kullu da ke samar da shi: Ana iya samun faɗin kullu da ake buƙata ta hanyar naɗin tauraron ɗan adam da naɗin takarda.
2. Mai yanka mai tsayi: Belin kullu da aka yanke ta hanyar mai yanka diski
3. Yaɗa bel ɗin: Raba bel ɗin kullu zuwa adadin sandunan da ake buƙata ta hanyar tsaga tsagi.
4. Na'urar Yanke Alwatika: A yanka bel ɗin kullu zuwa alwatika ta amfani da kayan aikin gogewa, kullu ba zai zame ba lokacin yankawa. Tsarin yankewa da na'urar maye gurbin sauri suna da sauƙi kuma masu dacewa lokacin maye gurbin ƙahonin girma dabam-dabam.
5. Na'urar juyawa: Na'urar juyawa ta croissant na iya juya tubalin alwatika cikin sauri da a hankali zuwa digiri 90 da ake buƙata don a naɗe ta hanyar birgima.
6. Na'urar birgima: Naɗa bel ɗin alwatika zuwa croissant ta hanyar na'ura ta musamman.
Bayanin Samfuri
| Tsawonsagg | 14000 mm |
| Faɗi | Sashen ciyar da tire: 4230mm Sashen ajiya: 1640mm |
| Tsawon farantin | 900 mm |
| Faɗin bel ɗin jigilar kaya | 720 mm |
| Saurin bel ɗin jigilar kaya | 9 m/min |
| Fitar da wutar lantarki | 18 KW |
| Wutar lantarki | 3 * 220-380 V, 50/60Hz |
| Ƙarfin wutar lantarki mai sarrafawa | 24 V DC |
| Haɗa da | Layin laminating na biredi |
| Nauyi | 1500kg |
| Zaɓi | • Faɗaɗa farantin aiki |
| Ƙarfin aiki | Girman:88CM-21600pc/H Girman: 110mm-18000pc/H Girman: 126mm-14400pc/H Girman: 180mm-10800pc/H Girman: 263mm-7200pc/H |
